OontZ Angle 3 Manual - UK

Click here to download the OontZ Angle 3 Manual as a PDF

Table of Contents

  1. In the Package
  2. Buttons and Connectors
  3. Charging the Battery
  4. Turning On and Off
  5. Pair & Connect -- Step 1
  6. Pair & Connect -- Step 2 --
  7. Playing From Your Windows 7 or 8 Laptop/Computer and Non-Bluetooth Audio Devices Using the 3.5mm Audio Cable
  8. IPX5 Water Resistance
  9. Wireless Hands Free Personal Speakerphone
  10. Troubleshooting
  11. Resetting Your OontZ Angle 3
  12. Customer Support
  13. Safety and Precautions

 


In the Package

 


Buttons and Connectors

 


Charging the Battery

The lithium ion rechargeable battery will have a partial charge and be ready to play. For maximum playtime, fully charge the battery. You can play while charging.

To charge the battery:

Step 1: Lift up the rubber flap from the bottom to access the Micro USB Charging Port. 

Step 2: Insert the smaller end of the Micro USB Cable into the Micro USB Charging Port as shown.

Step 3: Insert the larger end of the Micro USB charging cable into either a USB wall charger (5V 1.0A up to 5V 2.4A maximum) for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the OontZ Angle 3 battery.

Charging LED Light (Red)
(LED visible when connected to a charging source)
Slowly flashing Red when charging 
Solid Red when fully charged

Note: Close the rubber flap when not charging. The rubber flap needs to be closed to keep the speaker water resistant

Music Play Time
Up to 12 hours on a full charge, at 2/3 volume. Louder volumes will reduce the battery play time.

Play while charging
You can play the OontZ Angle 3 while it is charging.

Power Saving Feature
- When playing from battery power the OontZ Angle 3 will turn off after 15 minutes of not playing audio to conserve the battery charge. Exception: when playing audio from an Amazon Echo Dot, the power saving feature on the speaker is disabled by the Amazon Echo Dot and the OontZ Angle 3 will not automatically turn off after 15 minutes.
- When plugged in to a USB wall charger or USB port on a laptop/computer (not in sleep mode) the OontZ Angle 3 will remain on until you turn the power off. You can continue to keep the speaker plugged in to a charging source even when it is fully charged.

Low Charge Remaining Indicator
When the battery charge is down to about 15% the Charging LED Light (Red) will begin flashing Red and will remain flashing until the speaker is turned off. The volume will decrease to preserve the remaining battery charge. 

Charging Time
It will take about 5 to 6 hours to fully charge a low battery.

 


Turning On and Off

Turn ON
Press and Release the Power Button

Charging LED Light (Red)
Turns on for one to two seconds, then turns off when playing from battery power
Bluetooth LED Light (Blue)
Blue light will turn on
Flashing Blue indicates speaker is in pairing mode
Solid Blue indicates speaker is connected to a audio source device and ready to play

Turn OFF
Press and Hold Down the Power Button for 3 Seconds
Bluetooth LED Light
Blue light will turn off

 


Pair & Connect -- Step 1

- Make sure your OontZ Angle 3 battery has a sufficient charge
- Your audio source device needs to be within 33 unobstructed feet of the OontZ Angle 3

Turn ON your OontZ Angle 3

The Bluetooth LED Light (Blue) will turn on.

If the blue light is flashing the OontZ Angle 3 is ready to pair and connect.

If the blue light is solid the OontZ Angle 3 has automatically reconnected to the last audio source device the speaker was connected to and is ready to play. Note: The OontZ Angle 3 will automatically try to connect to the last audio source device it was connected to each time it is turned on and that audio source device is within range.

The OontZ Angle 3 can be connected to one audio source device at a time.
To pair and connect to a different audio source device, you need to first disconnect the currently paired audio source device. To disconnect it, press and hold down the Bluetooth button for 3 seconds. The blue light will begin flashing and the OontZ Angle 3 is ready to pair and connect.

 


Pair & Connect -- Step 2 --

-- From Your From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices

To pair and connect from an iPhone, iPad, or iPod:

- Go to Settings > Bluetooth, check Bluetooth is on
- Select ‘OontZ Angle’ when it appears under OTHER DEVICES
- The speaker will connect in a few seconds
- The Bluetooth LED Light (Blue) will be solid blue
- You can now play your audio wirelessly to your OontZ Angle 3

To pair and connect from a Smartphone or Tablet:

- Go to Settings > Bluetooth, check Bluetooth is on
- Scan or Search and select ‘OontZ Angle’ when it appears under AVAILABLE DEVICES
- The speaker will connect in a few seconds
- The Bluetooth LED Light (Blue) will be solid blue
- You can now play your audio wirelessly to your OontZ Angle 3

Note: Your Smartphone or Tablet instructions may vary, please check your mobile device’s manual for specific pairing instructions 

 

-- From Your Apple Mac or Windows 10 Laptop/Computer

For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit:  TheOontZ.com/pairing

Windows 7 or 8 laptops/computers may have difficulty pairing and connecting over Bluetooth. If this occurs it is recommended to connect and play using the 3.5mm audio cable. . Please view the section:  ‘Playing From Your Windows 7 or 8 Laptop/Computer and Non-Bluetooth Audio Devices Using the 3.5mm Audio Cable’.’.

 

-- From Your Amazon Echo Dot

Turn on your OontZ Angle 3 first and make sure it is in pairing mode.

To pair and connect your OontZ Angle 3 the first time from the Amazon Echo Dot you need to use the Alexa app on your iPhone, iPad, Smartphone, or Tablet.

First make sure to disconnect any other Bluetooth device from the Amazon Echo Dot. The Amazon Echo Dot can only connect to one Bluetooth device at a time.

- Open the Alexa app
- Go to the ‘Home’ menu by pressing the 3 horizontal lines in the upper left corner next to ‘Home’
- Press ‘Settings’
- Select your Amazon Echo Dot under ‘Devices’ by pressing it
- Press ‘Bluetooth’
- Press ‘Pair a New Device’. In a few seconds the ‘OontZ Angle’ will appear in the list of ‘Available Speakers’
- Select ‘OontZ Angle’
- In a few seconds you will hear Alexa’s voice coming through the OontZ Angle 3 : “Connected to OontZ Angle”
- The audio from the Amazon Echo Dot will now play through the OontZ Angle 3

Now that the Amazon Echo Dot is paired to the OontZ Angle 3, if the speaker becomes disconnected or turned off, to re-connect turn on the OontZ Angle 3 and just say “Alexa, connect my speaker ” or “Alexa, pair”

Important Note: When the OontZ Angle 3 is playing from battery power and connected to the Amazon Echo Dot, the Amazon Echo Dot disables the power saving feature on the OontZ Angle 3 speaker. The speaker will remain on and it will not automatically turn off after 15 minutes of not playing audio. The Amazon Echo Dot is continuing to communicate to the speaker even when not playing audio and will use up the battery charge, at the same rate as full volume audio.

We recommend either: 1) Keeping the OontZ Angle 3 plugged into a USB wall charger or USB port on a laptop/computer, so it can remain on and available to play from the Amazon Echo Dot, without having the battery becoming drained. Or, 2) Turning the OontZ Angle 3 off when you are done listening. You can turn the OontZ Angle 3 speaker off by pressing and releasing the Power button on the OontZ Angle 3, or you can say "Alexa, disconnect my speaker" and the OontZ Angle 3 will automatically turn off after 15 minutes. When you want to play to the speaker again turn on the OontZ Angle 3 and say “Alexa, connect my speaker ” or “Alexa, pair” and the Amazon Echo Dot will connect and the audio will play through the OontZ Angle 3.

If you need assistance with your Alexa app, contact Amazon's support through the app. Open the Alexa app and select Help & Feedback > Email Customer Service

 


Playing From Your Windows 7 or 8 Laptop/Computer and Non-Bluetooth Audio Devices Using the 3.5mm Audio Cable

- Make sure your OontZ Angle 3 battery has a sufficient charge

 - Note: The Bluetooth on the OontZ Angle 3 is disabled when the 3.5mm audio cable is connected to the speaker. You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth audio source device.
- Note: Close the rubber flap when not using the 3.5mm audio cable. The rubber flap needs to be closed to keep the speaker water resistant.

 


 

IPX5 Water Resistance

Gentle Water Spray or Splash is okay DO NOT allow speaker to sit in water DO NOT allow speaker
to submerge fully or partially in water

IPX5 rating - The OontZ Angle 3 can resist gentle water spray & splash but cannot be partially or fully submerged or left in a wet environment for an extended period of time, any of which could cause unrepairable damage to the speaker. 

- Note:   The rubber flap needs to be closed to keep the speaker water resistant.    When charging or using the 3.5mm audio cable, please keep the speaker away from water as it can be damaged by water entering the connectors.

 


Wireless Hands Free Personal Speakerphone

The Wireless Hands Free Personal Speakerphone feature works for calls with Smartphones and iPhones only, connected over Bluetooth.

To answer an Incoming Call / To End a Call
Press and Release the Bluetooth Button

To Reject an Incoming Call
Press and Hold Down the Bluetooth Button for 3 Seconds



Troubleshooting Your OontZ Angle 3

For assistance with questions or any issue with your OontZ Angle 3 that is not answered in the troubleshooting tips below, please contact us by visiting: TheOontZ.com/support and filling out our customer service form.  

OontZ Angle 3 will not turn on

Cannot pair or connect to the OontZ Angle 3 --

-- For iPhone, iPad, iPod

-- For Smartphones and Tablets

-- For Apple Mac

-- For Windows systems

No audio playing from the OontZ Angle 3 when connected over Bluetooth

Poor sound quality when connected over Bluetooth 

No audio playing from the OontZ Angle 3 when connected with the 3.5mm audio cable

Poor sound quality when connected with the 3.5mm audio cable 

No response when pressing any button or speaker will not turn off

If you're having trouble trying to connect your Amazon Echo Dot to your OontZ Angle 3

Poor quality or skipping audio when connected to Amazon Echo Dot

Your OontZ speaker's battery charge becomes drained when connected to Amazon Echo Dot despite not playing audio

 


Resetting Your OontZ Angle 3

Note: The reset function only applies to speakers purchased after Sept 1, 2016

Step 1: Remove the Micro USB charging cable and 3.5mm Audio cable, if connected

Step 2: Turn on your OontZ Angle 3

Step 3: Insert either a toothpick or straightened paper clip into the AUX IN jack until it makes contact with the micro switch.  Gently push and release the switch and the speaker will reset.

 


Customer Support

For assistance with questions or any issue with your OontZ Angle 3 that is not answered in the troubleshooting tips, please contact us by visiting: TheOontZ.com/support and filling out our customer service form.

 


Safety and Precautions

  1. When the OontZ Angle 3 speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
  2. Read and follow all instructions – All operating and use instructions should be followed.
  3. Protect the Micro USB charging cable from being pinched, particularly at the connectors.
  4. Unplug the Micro USB charging cable during lightning storms or when unused for long periods of time.
  5. Do not place speaker near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way.
  7. Do NOT make unauthorized alterations to this speaker.
  8. Use this speaker only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC) in accordance with the manufacturer’s specifications.
  9. Do NOT place naked flame sources, such as lighted candles, on or near the speaker.
  10. Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like)
  11. If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice.

Apple, iPhone, iPad, iPod, and Mac are registered trademarks of Apple Inc.
Amazon, Alexa, Amazon Echo and Amazon Echo Dot are registered trademarks of Amazon.com, Inc.
Windows is a registered trademark of Microsoft Corporation
Bluetooth is a registered trademark of Bluetooth SIG, Inc.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Any changes to this device not expressly approved by SoundWorks, INC may void the user’s authority to operate this device.